![[Laser cut and engrave] Christmas Vacation](https://image-res.xtool.com/resource/xtool%2Fcommunity%2Fmaking%2Fbc18e8ab-3ae1-4f32-81d3-97cc285e50ec%2F20231117_182024.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Christmas Vacation
Instruction
Information
Inspired by the movie poster Christmas vacation. This is a fun decoration that brings the laughter of the film to life
Instruction
Step1: Cut out Santa
Santa has a cutout, score and engrave element. The outline of Santa is set to score and the inside is engrave.
Check settings for each score, engrave and cutting. I set them to my liking but your tastes might be different.
Step2: Cabin
The cottage is set as a mirror image so they line up like a real front and back of a 3D object. So make sure you do not just cut the same one twice.
Check settings for each score, engrave and cutting. I set them to my liking but your tastes might be different.
Step3: small bits
The small rectangular pieces with the 2 little nubs are to go between the cottage pieces at the top 2 holes. These hold up Santa.
The 2 rectangular pieces that have the 2 slits are to hold the cottage together at the bottom. They also look like a bit of a porch on the cottage.
Check settings for each score, engrave and cutting. I set them to my liking but your tastes might be different.
Step4: Assembly
Before assembling the final project be sure to paint the pieces before gluing them together. I found that putting the bottom rectangular pieces on was a lot easier than putting in the top pieces. The bottom held it snugly as I wiggled the top parts in. Using a clamp of some kind to hold it as it dries is best.
For an added touch I found a little string of pixie LED lights to wrap around Santa to bring it to life.