HomeTemplatesMiniaturesVehicle
comp56
Report
Laser cut and engrave Wooden sled on snow representing winter holiday season
Project made with xTool S1 machine for Winter.
Project made with xTool S1 machine for Winter.
Laser cut and engrave Wooden sled on snow representing winter holiday season
Project made with xTool S1 machine for Winter.
Laser cut and engrave Wooden sled on snow representing winter holiday season
Laser cut and engrave Wooden sled on snow representing winter holiday season
Laser cut and engrave Wooden sled on snow representing winter holiday season
Laser cut and engrave Wooden sled on snow representing winter holiday season
Laser cut and engrave Wooden sled on snow representing winter holiday season

Miniature Wooden sled on snow

Instruction
toboggan.xcs
toboggan
.xcs
Application scenario
Laser processing (17min)
Machine & module
xTool S1
20W
Material used
birch
glue
ropes
5
211
Information
      Nothing but the real thing just really really small.
Instruction
1
Step1
Preview
Preview
Preview
Preview
  1. This project is making a toboggan or sled
  2. This starts with a sized rectangle and is set
  3. With the kerf pattern for wood bending in place the front rolls up
  4. Side posts are created along with slats for the floor of the sled.
  5. With all adjustments to the settings the project is sent to be processed.
  6. After processing is complete the front of the new cut floor is bent up to meet the 2 upright posts. these are all glued in place.
  7. With this ready the slats are then glued to the floor spaced out to be realistic.
  8. Then a rope is added for the real effect,
  9. Now it is time to have some joy in the deep snow.
Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1

License

CC0