stephcreated
Report

Christmas Themed Stickers

Instruction
christmasstickers.xcs
christmasstickers
.xcs
Application scenario
Blade cut、Inkjet printing
Machine & module
xTool M1 Ultra
20W
Material used
printable sticker paper
1
242
Instruction
1
Step1: Design
Preview
  • Start by creating your design in Canva
  • Save your file as a PNG and bring it into XCS.
  • You will need to create an offset for each sticker piece
    • Select the design
    • Click on offset and create an offset to your liking and click confirm.
    • Select both the outline and design and group them together.
    • Repeat these steps for each sticker
  • Next you will need to create the actual sticker sheet.
    • Create a box (for this design I used a 4x4 but depending on how large or small you want you stickers you can size up or down)
    • Next arrange and size your stickers inside of the rectangle box.
    • Click the rectangle box and assign it a different color come the sticker offset. This will be helpful later when you need assign to different cut settings.
2
Step2: Laser
Preview
  • Change your process to inkjet printing found on the top toolbar
  • Place your stick mat down inside the machine long with your sticker paper on top 
  • Print you project
  • Once done, change the process to blade cut
    • The big rectangle box will need different cut settings than the offsets because we want this cut to cut all the way through.
      • I used a glossy printable vinyl sticker paper and the settings that worked for me 120/60/2.
    • The offset don't need to be cut through just need to be cut for peeling.
      • The settings 80/80/1 worked well for this.
3
Step3: Done
Preview
Preview

Now you're all done and can start using your new stickers!

Comments
Remixes
xTool Supplies Used in This Template
xTool M1 Ultra
xTool M1 Ultra