Report
Graduation themed sticker sheet
InstructionGraduationStickers
.xcs
Application scenario
Blade cut、Inkjet printing
Machine & module
xTool M1 Ultra
20WMaterial used
sticker paper
5
253
Instruction
1
Step1: Design
Preview
Preview
Preview
3 More images
- Start by creating your design in Canva
- Save your file as a PNG and bring it into XCS.
- You will need to create an offset for each sticker piece
- Select the design
- Click on offset and create an offset to your liking and click confirm.
- Select both the outline and design and group them together.
- Repeat these steps for each sticker
- Next you will need to create the actual sticker sheet.
- Create a box (for this design I used a 3x5 but depending on how large or small you want you stickers you can size up or down)
- Next arrange and size your stickers inside of the rectangle box.
- Click the rectangle box and assign it a different color come the sticker offset. This will be helpful later when you need assign to different cut settings.
- If you added any text in XCS to your design you will need to create a mask
- You will need to find a color swatch on a search engine by searching the color name. Copy the photo and paste into XCS
- Select both the text and color swatch and click Create Mask up at the top
- Move the color swatch behind the text and click Done
- Now its ready to print!
2
Step2: Laser
Preview
Preview
- Change your process to inkjet printing found on the top toolbar
- Place your stick mat down inside the machine long with your sticker paper on top
- Print you project
- Once done, change the process to blade cut
- The big rectangle box will need different cut settings than the offsets because we want this cut to cut all the way through.
- I used a glossy printable vinyl sticker paper and the settings that worked for me 120/60/2.
- The offset don't need to be cut through just need to be cut for peeling.
- The settings 80/80/1 worked well for this.
- The big rectangle box will need different cut settings than the offsets because we want this cut to cut all the way through.
3
Step3: Done
Preview
Preview
Preview
- After you blade cut your project it is done! You can now take it off the sticky mat and use your new stickers!
Comments
Remixes
xTool Supplies Used in This Template