HomeTemplatesMiniaturesArchitecture
comp56
Report
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Miniature model of a green and black garage

Instruction
garage.xcs
garage
.xcs
Application scenario
Laser processing (45min)
Machine & module
xTool S1
20W
Material used
MDF
Glue
Birch
60
685
Information
      Small but mighty 2 car garage is way cheap if you build it with an S1
Instruction
1
Step1
Preview
Preview
Preview
  1. With this project the roof was designed first, pyramid style with 4 pieces.
  2. Each piece received shingles that were engraved.
  3. This was completed by making a mask for each piece.
  4. The next parts were the 4 walls, these walls were scored to duplicate siding.
  5. Each piece was set to be scored.
  6. The front a section was removed for the door and trim.
  7. The door was made from a different color material and it too was scored but with window cut outs.
  8. Once everything was designed it was all adjusted settings wise and it was sent to be processed.
  9. When finished the garage was glued together starting with the roof first.
  10. Then all the walls were glued, when the glue dried it was complete.
Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1

License

CC0