Report
![[Laser cut and engrave] Mini Football field](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/2c81a05e-f1f5-4a6d-98a5-5d2b29ed6c43?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Mini Football field
Instructionminifootballfield
.xcs
Application scenario
Laser processing (8min)
Machine & module
xTool S1
20WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
27
399
Instruction
1
Step1
Step 1: upload the file into xcs.
Step 2: Add your 3mm basswood(as i used) into your machine.
Step 3: adjust your engraving setting to your liking and process file.
Step 4: After processing file. attach the field goals to the field. You should not need any glue but if you're not satisfied with the fit then add wood glue.
this project is 5in wide and 2.75 inches.
Comments
