Report
![[Laser cut and engrave] Wooden rose with heart 'Be My Valentine' decoration](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/c341cfba-7e3a-40c0-94cb-fe45760100f4?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Be My Valentine Rose Line Art - Laser Cut Heart Rose Digital Download - Flower
InstructionBeMyValentineRose_01
.xcs
Show 1 more
Application scenario
Laser processing
Machine & module
xTool M1 Ultra
20WCompatibles · 11
Material used
1/4"(6mm) Walnut Plywood
268
1074
Information
Create a romantic Valentine’s Day gift with this Be My Valentine Rose ❤️ Laser Cut Design! Includes SVG & xTool (.xcs) files – just open the xTool file and hit start for 6mm walnut plywood.
✨ What's Included:
✔ SVG File – Compatible with any laser cut
✔ xTool .XCS File – Pre-set for 6mm walnut plywood
💡 Best Results:
Use 6mm walnut or mahogany plywood for contrast
Finish with wood sealant for a polished look
Minimum size: 10 cm to prevent breakage
💝 Perfect for:
✅ Valentine’s Day Gifts & DIY Love Decor
✅ Personalized Anniversary Keepsakes
You can also change the test to anything you like!
Instruction
1
Step1
Materials Needed:
✔ 6mm plywood (Mahogany & Walnut recommended)
✔ xTool Laser Cutter (or compatible machine)
✔ Wood glue (for assembly)
✔ Wood finish (optional for darker walnut)
2
Step2
Prepare Your First Material (Mahogany)
- Open a new project in xTool and select 6mm Mahogany as your material.
- Download the file and separate the layers:
- Keep the line art flower and engraving part
- Delete the outline (we’ll cut this later with walnut).
3
Step3
Mark your work area and use auto-focus for precision.
Engraving & Cutting Settings for Mahogany
- Apply these settings:
- Engraving: Power 60, Speed 130
- Cutting: Power 75, Speed 4
4
Step4
Hit “Process” and Start!
- The engraving and cutting process takes about 12 minutes.
✅ Now your Mahogany piece is ready! Let’s move to the walnut outline
5
Step5
Prepare Your Second Material (Walnut)
- Open a new document and select 6mm Walnut as your material.
- Check your process area and focus settings to match the Mahogany piece.
- Import the design and separate the layers again:
- Keep only the outline
- Delete the line art and engraving part
- ⚠ Make sure the size stays the same so the pieces fit perfectly!
6
Step6
- Apply the cutting settings:
- Power 75, Speed 4 (Note: Some walnut types may require Power 80-85 for a cleaner cut).
- Hit “Process” and Start!
✅ Now you have both pieces ready!
7
Step7
Finishing & Assembly
(Optional) Apply a wood finish to the walnut outline for a richer tone.
- Use wood glue to carefully attach the Mahogany engraving piece to the Walnut outline-Let it dry, and your laser-cut Valentine’s gift is complete! 🎁
Hope you enjoy making it! 💖
Comments
