HomeTemplatesDecorHome DecorDoor Sign
WA CREATIONS
Report
Laser cut and engrave Decorative frame with playful cat silhouettes
Project made with xTool D1 Pro machine for Laser cut and engrave.
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave Decorative frame with playful cat silhouettes
Laser cut and engrave Decorative frame with playful cat silhouettes
Laser cut and engrave Decorative frame with playful cat silhouettes
Laser cut and engrave Decorative frame with playful cat silhouettes

Decorative acrylic door corner frame with playful cat silhouettes

Instruction
DoorFramePlayingCats.xcs
DoorFramePlayingCats
.xcs
Application scenario
Laser processing
Machine & module
xTool D1 Pro
20W
Compatibles · 10
Accessories
xTool D1 Pro/D1 Air Assist Set
xTool Honeycomb Working Panel Set for D1 Pro/D1
Material used
3mm Black Opaque Glossy Acrylic
253
1015
Information
      My young girl inspired this acrylic corner frame. Could be cut from wood too.
Instruction
1
Step1: Setup
Preview

Open xcs software and import xcs or svg file. Check the setting to make sure that they work with you laser machine. I like to do a faster cut on acrylic and two passes with air assist for a cleaner cut that is not melted. Size can be changed to bigger of smaller. Lay acrylic on honeycomb and adjust laser accordingly.

2
Step2: Cutting
Preview

Cut the file. I like to keep the backing paper on till after cutting. Pull of backing paper and mount on the door corner.

Comments
Remixes
xTool Supplies Used in This Template
xTool D1 Pro/D1 Air Assist Set
xTool D1 Pro/D1 Air Assist Set
xTool Honeycomb Working Panel Set for D1 Pro/D1
xTool Honeycomb Working Panel Set for D1 Pro/D1
xTool D1 Pro
xTool D1 Pro
3mm Black Opaque Glossy Acrylic
3mm Black Opaque Glossy Acrylic

License

CC BY