HomeTemplatesOffice & StationeryEducational Puzzles
annmariesilcock22
Report
Laser cut and engrave,Inkjet printing
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Laser cut and engrave,Inkjet printing
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Laser cut and engrave,Inkjet printing
Laser cut and engrave,Inkjet printing
Laser cut and engrave,Inkjet printing
Laser cut and engrave,Inkjet printing
Laser cut and engrave,Inkjet printing

Childrens Days of the week board

Instruction
daysoftheweek.xcs
daysoftheweek
.xcs
Application scenario
Laser processing、Inkjet printing
Machine & module
xTool M1 Ultra
20W
Compatibles · 10
Material used
3mm Basswood Plywood
15
209
Information
      I made an educational days of the week board with separate days of the week cut out to attach to the board, I put magnetic tape on the board and magnets on the back of the days of the week pieces.  This project prints the images, engraves the text and cuts out the board and days of the week
Instruction
1
Step1

start with the printer module in the m1 

tape the wood to the honeycomb plate for lasering 

after printing swap the printer module for the laser module, don't move the wood

laser and engrave the wood

 

canvas 2 - cut and engrave 

 

use velcrow or magnets on the back of each day and the board between “today” “yesterday” and “tomorrow”

Comments
Remixes
xTool Supplies Used in This Template
xTool M1 Ultra
xTool M1 Ultra
3mm Basswood Plywood
3mm Basswood Plywood

License

Standard License