HomeTemplatesDecorHome DecorDesk Decor
comp56
Report
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Wooden dolphin and whale decorative ornaments

Instruction
whaledolphin.xcs
whaledolphin
.xcs
Application scenario
Laser processing (25min)
Machine & module
xTool S1
20W
Material used
5/8" cedar
16mm cedar
325
3038
Information
      thick with depth of a whale and dolphin together
AImake Info
atomm-ai-image
Style: 2D graphics
[Prompt] killer whale
Instruction
1
Step1
Preview
Preview
Preview
2 More images
  1. With the thickness of 5/8" of an inch these can stand on their own. 
  2. The AImake created 2 different images for this project
  3. A whale and a dolphin
  4. These are then brought into the xcs program and resized.
  5. With some parts of the dolphin and whale they are set to be engraved.
  6. After adjustments to these fish the project is sent to be processed.
  7. Having a thickness of 16mm the power is high with multiple passes.
  8. When finished a slight hand sanding and a high gloss finish is added.
  9. Once dry they are ready to be enjoyed.
Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1

License

CC0
This work contains AI-generated content.