![[Laser cut and engrave] Red wooden earrings with intricate black floral design](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/6ecb01af-6575-46d5-babc-8c3cd516f595?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Faded wooden earrings with intricate floral design
Instruction
Information
I saw a technique I wanted to try, so I made these burgundy red earrings to figure that out.
Instruction
Step1: Cut the design
I wanted to make a solid color dangle earring to try out some painting technique. I made this swirly design for that - you can cut the design like I did, or just score / engrave the elements; feel free to customize your project.
The settings are for a 10W M1 machine, 3mm plywood
Step2: Paint
Choose a nice color, and add it with a sponge. It will create a textured look. I am using a simple acrylic paint, mixed the color for myself and added the color on both sides and aside as well!
Let it dry.
Step3: Sanding
To add an extra old-ish look, I took a fine sandpaper, and gently sanded the sides everywhere, and a bit sanded on both sides. Make this step very carefully, especially if you cut the design like I did - the lines are very thin, and you can break it.
Step4: (optional) Coat
You can add an extra coat of varnish or wax to make it extra secure, and water resistant. Since the design is very light, I suggest a lacque spray.
Step5: Add earring settings
You'll need 2/4 small circles, and 2 earring hoops to add - then you are ready to wear your new earrings.
Share your adaptions of the project, if you made it!
