Report
![[Blade cut] Thank you card](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/5175e579-e7e6-40ca-9cda-0bd0e7ce4a20?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Thank you card
InstructionThankyouCard2
.xcs
Application scenario
Blade cut
Machine & module
xTool M1 Ultra
20WMaterial used
cardstock
7
327
Information
Don't waste your money with store bought thank you cards. Create your own using your M1 Ultra
Instruction
1
Step1: Design
Preview
- Create your card by creating a rectangle sized to your liking
- For this design I used a 3"x 5"
- Bring in your images you would like to use
2
Step2: Laser
Preview
Preview
- Set up your laser for creating this project
- First set up your sticky mat and cardstock in your laser
- Set up your blade in the blade slot
- Change the processing type to inkjet printer
- After it prints you want to change the processing type to blade
- Make sure all your settings are correct
- I am using a 176g cardstock in this project and found 80 power / 80 speed / 2 passes worked for me. If you are using a lighter or thicker cardstock you will need to adjust your settings.
3
Step3: Finishing touch
Preview
- Fold over your card so that the design is showing on the front
- Write a message on the inside.
Comments
