Report
Wedding Greeting Card
Instructionweddingcard
.xcs
Application scenario
Blade cut、Inkjet printing
Machine & module
xTool M1 Ultra
20WMaterial used
cardstock
22
332
Information
Make a cute wedding card!
Instruction
1
Step1: Design
Preview
Preview
- Decide what you want your card to be
- Bring in some images or add some text to your design.
- Create a box 6" x 5"
- Create another box 3"x 5" and align the box to the right side of the 6"x5" box
- shown in the 2nd photo (Red box)
- Make sure you design is inside the red box. This is going to be the front side of the card.
- Once you have it all aligned delete the red box, this was just to help you place your design.
2
Step2: Laser
Preview
- First set up your sticky mat and cardstock in your laser
- Set up your blade in the blade slot
- Change the processing type to inkjet printer
- After it prints you want to change the processing type to blade
- Make sure all your settings are correct
- I am using a 176g cardstock in this project and found 80 power / 80 speed / 2 passes worked for me. If you are using a lighter or thicker cardstock you will need to adjust your settings.
3
Step3: Assembly
Preview
Preview
- Fold your card so that the design is on the front and the two sides are touching as showing in the photo.
Comments
Remixes
xTool Supplies Used in This Template