Report
![[Blade cut,Inkjet printing] New baby greeting card](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/00ce84c8-a2bc-47ca-8c9b-731401b814ca?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
New baby greeting card
Instructionnewbabycard
.xcs
Application scenario
Blade cut、Inkjet printing
Machine & module
xTool M1 Ultra
20WMaterial used
cardstock
6
230
Information
Create a greeting card to welcome a new family addition!
Instruction
1
Step1: Design
Preview
Preview
- Decide what you want your card to be
- Bring in some images or add some text to your design.
- Create a box 6" x 5"
- Create another box 3"x 5" and align the box to the right side of the 6"x5" box
- shown in the 2nd photo (Red box)
- Make sure you design is inside the red box. This is going to be the front side of the card.
2
Step2: Laser
Preview
Preview
- First set up your sticky mat and cardstock in your laser
- Set up your blade in the blade slot
- Change the processing type to inkjet printer
- After it prints you want to change the processing type to blade
- Make sure all your settings are correct
- I am using a 176g cardstock in this project and found 80 power / 80 speed / 2 passes worked for me. If you are using a lighter or thicker cardstock you will need to adjust your settings.
3
Step3: Assembly
Preview
- Fold card over so that the design is showing on the front and the two sides perfectly align.
Comments
