stephcreated
Report

Christmas Place Setting Card with Name

Instruction
ChrismtasPlaceCard.xcs
ChrismtasPlaceCard
.xcs
Application scenario
Blade cut、Inkjet printing、Pen drawing
Machine & module
xTool M1 Ultra
20W
Material used
cardstock
2
314
Information
      Use your machine to make christmas dinner place setting cards!
    
Instruction
1
Step1: Design
Preview
Preview
  • Select your design you want to use. 
  • Create a box 4" x 3.5"
  • Create a text box with the text you would like to use
  • Arrange the design and text inside the box.
    • You want to make sure your photo and text are more towards the bottom of the box so when you fold it over it will be on the right side.
2
Step2: Laser
Preview
Preview
Preview
2 More images
  • First set up your sticky mat and cardstock in your laser
  • Change the processing type to inkjet printer
  • After it prints you want to change the processing type Pen
    • Put your pen in the pen adapter and place in machine like shown in third photo.
    • Select your pen settings, for this design I used “fill”
  • Once done, make sure that the box around the photo and text is turned off. You can do that by clicking on the box and making sure the output is not green, as shown in the fourth photo.
  • Once that is done processing switch the processing type to Blade
  • Remove the pen and install the blade
  • Make sure the text that the pen just created is now turned off OR your blade will cut the text! 
  • Make sure all your settings are correct and process your cut.
    • I am using a 176g cardstock in this project and found 80 power / 80 speed / 2 passes worked for me. If you are using a lighter or thicker cardstock you will need to adjust your settings. 
3
Step3: Assembly
Preview
  • Fold your card over so that the top and bottom are touching and the design is showing, as shown. 
Comments
Remixes
xTool Supplies Used in This Template
xTool M1 Ultra
xTool M1 Ultra