Easter Door Sign Laser Cut. Hop Easter Door. HOP Easter Bunny Wooden Sign Decoration.
Instruction
Easter Door Sign Laser Cut. Hop Laser Cut. HOP Easter Bunny Wooden Sign Decoration.
Recommended material - Plywood, MDF, Acrylic, Plexiglas, Metal, Cardboard, Paper.
You can increase the size of a design. But when reducing the design, consider thin elements.
Recommended Material Thickness for Wood - 3 - 6 mm (1 / 12in - 1 / 4in).
This ZIP archive contains:
file in SVG format
file in PNG format
file in DXF format
file in PDF format
file in EPS format
file in XCS format
Please, feel free contact me, if you have any questions.
Thank you for shopping!
1.Open File
2. Position your chosen material on the lazerbed.
3. Move the image in the CreativeSpace so you can align your lazer with the material so as to avoid material wastage.
4. Set the correct processing parameters for your material, check it's set to output and cutting.
5. Select the Red Layer (the cutting) Set the Power 100 Set Speed 8 Set Number of passes 1
1. Make sure to rub any edges to remove smoke marks and ash from the Lazer cutting process.
2.Varnish them. Any remaining smokey residue will be set into the varnish.Make sure you varnish the edges where there is the most smoke residue to seal them up.
3.If your wood comes pre-varnished, still do this step of prep and varnish, except instead of varnishing the top and back of your cut parts, avoid the already varnished surface and varnish the lazercut edges along the side to stop that smokey residue marking hands.
You can use any material with a thickness of 6 mm.
4. Use your favourite color.
So, it is ready!