Report
Happy Easter Bunny Basswood Cut/Engrave Designs Money Cards (3 Designs Included)
InstructionFFEasterBunnyMoneyWalletCardsv1
.xcs
Application scenario
Laser processing (9min)
Machine & module
xTool S1
40WCompatibles · 8
Accessories
xTool S1 40W Laser Module
xTool Safety goggles
xTool S1 Honeycomb Panel
xTool Smoke Purifier
xTool S1 Marking Stickers
Material used
3mm Basswood Plywood
3mm Birch Plywood
81
347
Information
I have done these for Christmas, so thought I would do some Easter Bunny Ones with an Old Bunny Design I had!
Great for gifting money for children.
Please show your appreciation for this Free File by Leaving a Comment/Like/Follow
Instruction
1
Step1
Put on all your Equipment Ready to Start
I used the S1 40W with Honeycomb Plate with the Fire Safety Unit, XTool Satefy Pro AP2 and the Magnetic Pins to Hold/Secure the Basswood in Place.
Ensure you have taken all Safety Precautions Before Starting this project (as per manufactory instructions)
Place your Basswood on the Honeycomb Plate, making sure it's nice and straight.
Set your Automatic Distance
Mark your Processing Area
Add Any Additional Personalisation you want to the designs.
Process Your Design & Watch the Magic!
Copyright remains the property of Frenchie Firm & Creative Sublimation Designs 2025
Comments
Remixes
xTool Supplies Used in This Template