HomeTemplatesFashion & WearablesJewelry
LittleLaserCraft
Report
Laser cut and engrave Little Laser Craft stylish geometric pendant with leaves
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave Little Laser Craft stylish geometric pendant with leaves
Laser cut and engrave Little Laser Craft stylish geometric pendant with leaves

Tracing paper ornament necklace

Instruction
TracingpaperNecklace31.01.25V1.xcs
TracingpaperNecklace31
.01
Application scenario
Laser processing (15min)
Machine & module
xTool S1
40W
Compatibles · 8
Material used
3mm Basswood Plywood
Tracing Paper
4
140
Information
      A ornament necklace with tracing paper between the layers. The project consists of two identical files that are glued together. In between, there is tracing paper for a beautiful light effect.
Instruction
1
Step1: Cut out

Cut out two pieces

2
Step2: Color it (optional)
Preview

Color the two pieces if desired

3
Step3: Create a template using tracing paper
Preview

Take a finished piece as a template and trace the outlines with a pencil. Then cut it out.

4
Step4: Glue the paper

Glue the tracing paper onto the side of the piece that is not painted. Glue both pieces flush together. Done

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1
3mm Basswood Plywood
3mm Basswood Plywood
Tracing Paper
Tracing Paper

License

CC BY-NC-ND