Report
![[Laser cut and engrave] Engraved wooden keychain with angel design and 'My angel' text](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/80ebeace-4b7a-4805-87f7-b2c9d1af293e?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Engraved wooden keychain with angel design and 'My angel' text
InstructionAngelKeychain
.xcs
Show 1 more
Application scenario
Laser processing (10min)
Machine & module
xTool D1 Pro
20WCompatibles · 11
Accessories
xTool D1 Pro/D1 Air Assist Set
xTool Honeycomb Working Panel Set for D1 Pro/D1
Material used
1/8"(3mm) Basswood Plywood
661
2683
Information
Just a little keychain for a loved one. I used to 20w module. Design find would not let me enter it. Just let me enter the laser type.
Instruction
1
Step1: Setup
Preview
Open xcs software and import xcs or svg file. Check the setting to make sure that they work with you laser machine. Size can be changed to bigger of smaller. Lay wood on honeycomb and adjust laser accordingly.
2
Step2: Cutting and engraving
Engrave and cut the file. Clean and fasten keyring.
Comments
