Report
Northern Moose
InstructionMoose and northern lights
.xcs
56
334
Instruction
1
Step1
- Using the laser module, cut out the moose (Either as is, or with etched words you'd like to add, such as a family name) then remove from the machine.
- Using the printer module, print the background using the printer module. Leave the piece in the machine (This Option is Optional)
- Using the laser module, cut the circle around the piece you just printed. (If skipped sept 2, paint this circle black or dark blue.
- Paint the moose piece black.
- Paint the northern lights using more vibrant colours if they are too dull. I used a dark MDF board, therefore the colours turned out more dull than I wanted them to be. I added more colour using my Posca markers.
- Making sure the small grooves aling, use whatever glue you prefer (I used Loktite).
- Sand the sides to remove the charcoal if needed.
- Seal the project using 2 coats of semi-gloss Lacquer.
Comments
Remixes