F1 Ultra Business Card Jig

Information

      This is a 6up jig for your standard aluminum or stainless business cards.
Both Vertical and Horizontal

You can import the project to your XCS.
1) Download the STL or 3MF from Makerworld
https://makerworld.com/en/models/1038201

2) 3D Print the jig
3) Import the XCS file to your software or SVG to light-burn
4) check the output to " ON ", and  frame the jig to your F1 Ultra ( each machine has a slightly different center, so you MUST adjust it one time before you start lasering with JIG )
5) disable the template so you don't accidentally laser those borders. 
6) make sure the  layer is locked
7) place your design in any of the boxes, Happy lasering

You do need a 3D printer to print this jig, keep in mind that you can not print this on Bambu A1 mini, Prusa Mini/Mini+ as the bed size is not sufficient. 

link to download the 3D model.