Report
![[Laser cut and engrave] Flying Cupid acrylic earings with bow and arrow.](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/ee267c9b-08ff-457a-af7b-f88169028530?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Flying Cupid acrylic earings with bow and arrow.
InstructionCupidEaring
.xcs
Show 1 more
Application scenario
Laser processing
Machine & module
xTool D1 Pro
20WAccessories
xTool Honeycomb Working Panel Set for D1 Pro/D1
xTool D1 Pro/D1 Air Assist Set
Material used
3mm Black Opaque Acrylic
89
428
Information
Capture some attention with these cute valentines day cupid earings. Made from black acrylic but could use wood as well.
Instruction
1
Step1: Setup
Preview
Open xcs software and import xcs or svg file. Check the setting to make sure that they work with you laser machine. I like to do a faster cut on acrylic and two passes with air assist for a cleaner cut that is not melted. Size can be changed to bigger of smaller. I found this to be the perfect choice. Lay acrylic on honeycomb and adjust laser accordingly.
2
Step2: Cutting
Preview
Cut the file. I like to keep the backing paper on till after cutting. Pull of backing paper and fasten the earing ring of your choice.
Comments
