Report
![[Laser cut and engrave] You & Me wooden decoration with heart-shaped tree and couple silhouette](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/6c044d6c-a669-4a82-ab51-460a0af84a2b.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
You & Me wooden decoration with heart-shaped tree and couple silhouette
InstructionYou&Mewoodendecorationwithheart-shapedtreeandcouplesilhouette
.xcs
Application scenario
Laser processing
Machine & module
xTool M1 Ultra
20WCompatibles · 10
Material used
3mm Basswood Plywood
551
3088
Information
The "You & Me" Wooden Decoration is a charming and sentimental piece perfect for celebrating love and togetherness.
It features a heart-shaped tree design intricately carved to symbolize growth and affection, along with a couple silhouette nestled beneath, representing unity and connection.
Crafted from 3-mmBasswood, this decoration exudes warmth and rustic elegance, making it an ideal gift for anniversaries, weddings, or as a heartfelt home décor item.
Instruction
1
Step1
Preview
1. Prepare the Laser Cutter and Inkjet Module:
- Load the 3mm Maple Plywood into your laser cutter.
- Open the design file in Creative Space Software and ensure the layout fits within the material boundaries.
- Secure the plywood to the laser bed to prevent movement during cutting.
- Swap the tray to the honeycomb tray or add raiser under the 3mm Maple Plywood
- Use some tape to hold down the board if needed.
- Enable the output (ignore) two big hearts frame
2. Set Cutting Parameters:
- Adjust the laser focus height and define the cutting boundaries according to your material and machine specifications.
- Double-check settings to ensure clean cuts without scorching.
3. Run the File:
- Begin the cutting process.
- Monitor the process to ensure accuracy, particularly for the intricate Celtic Heart inlay on the top piece.
2
Step2
Preview
1. Prepare the Laser Cutter:
- Load the 3mm Maple Plywood into your laser cutter.
- Secure the plywood to the laser bed to prevent movement during cutting.
- Swap the tray to the honeycomb tray or add raiser under the 3mm Maple Plywood
- Use some tape to hold down the board if needed.
- Enable the output (ignore) of the You&me sign, the couple and the tree.
2. Set Cutting Parameters:
- Adjust the laser focus height and define the cutting boundaries according to your material and machine specifications.
- Double-check settings to ensure clean cuts without scorching.
3. Run the File:
- Begin the cutting process.
- Monitor the process to ensure accuracy, particularly for the intricate Celtic Heart inlay on the top piece.
3
Step3
Preview
Easy last step.
Glue them together :D
Comments
