HomeTemplatesHome DecorOrnament
DesignsByShiro
Report
[Laser cut and engrave,Inkjet printing] Valentine’s Special: Double-Layered Wooden Rose with Heart Stand
Project made with xTool M1 Ultra machine for Valentine's Day.
Project made with xTool M1 Ultra machine for Valentine's Day.
[Laser cut and engrave,Inkjet printing] Valentine’s Special: Double-Layered Wooden Rose with Heart Stand
[Laser cut and engrave,Inkjet printing] Valentine’s Special: Double-Layered Wooden Rose with Heart Stand
[Laser cut and engrave,Inkjet printing] Valentine’s Special: Double-Layered Wooden Rose with Heart Stand
[Laser cut and engrave,Inkjet printing] Valentine’s Special: Double-Layered Wooden Rose with Heart Stand
[Laser cut and engrave,Inkjet printing] Valentine’s Special: Double-Layered Wooden Rose with Heart Stand

Valentine’s Special: Double-Layered Wooden Rose with Heart Stand

Instruction
Rose.xcs
Rose
.xcs
Application scenario
Laser processing、Inkjet printing (25min)
Machine & module
xTool M1 Ultra
20W
Compatibles · 11
Material used
1/8"(3mm) Basswood Plywood
346
1701

Information

      Here's our take on a Rose. Used M1 Ultra to print but can be made with any other laser machine. You just have to paint manually or use any other methods

Instruction

1

Step1: Rose

Valentine’s Special: Double-Layered Wooden Rose with Heart Stand instruction: step 1 - Rose
Preview
Valentine’s Special: Double-Layered Wooden Rose with Heart Stand instruction: step 1 - Rose
Preview
  1. Print the Rose - Intensity 60 - Passes 2
  2. Cut the outline rose - 100 Power, 10 Speed
     
2

Step2: Base

Valentine’s Special: Double-Layered Wooden Rose with Heart Stand instruction: step 2 - Base
Preview

Canvas 2:

Print and Cut the hearts with the same configuration

Print: Intensity 60, Passes 2
Cut : 100 Power, 10 Speed
Scoring on Big heart: 60 Power, 40 Speed

3

Step3: Glue

Valentine’s Special: Double-Layered Wooden Rose with Heart Stand instruction: step 3 - Glue
Preview
Valentine’s Special: Double-Layered Wooden Rose with Heart Stand instruction: step 3 - Glue
Preview

Glue the Rose outline on top of the rose.
Glue the Small Rose on the scored line of the big rose 

4

Step4: All Done

Valentine’s Special: Double-Layered Wooden Rose with Heart Stand instruction: step 4 - All Done
Preview

Your rose with Stand is ready

Comments

Remixes

xTool Supplies Used in This Template

xTool M1 Ultra
xTool M1 Ultra
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood

License

CC BY-NC-SA
This work contains AI-generated content.