HomeTemplatesFashion & WearablesJewelry
tadejss
Report
[Laser cut and engrave] Handcrafted wooden llama figure and its outline shape
Project made with xTool F1 machine for Laser cut and engrave.

Llama / Alpaca Stud Earrings

Instruction
Alpaca.xcs
Alpaca
.xcs
Application scenario
Laser processing
Machine & module
xTool F1
2W, 10W
Compatibles · 10
Material used
1/8"(3mm) Basswood Plywood
117
502

Information

      Handcrafted wooden llama figure and its outline shape stud earrings.

Instruction

1

Step1: Cut the design and paint it

Llama / Alpaca Stud Earrings instruction: step 1 - Cut the design and paint it
Preview

Upload the file to XCS and cut it. For best results use masking tape if cutting on the F1 as it simplifies the painting process due to no burn marks. I recommend using acrylic painting pens as the tips are very thin and simplify painting smaller designs.

2

Step2: Apply the stud blank with glue

Llama / Alpaca Stud Earrings instruction: step 2 - Apply the stud blank with glue
Preview

Apply a generous amount of superglue to the back of the previously cut earrings and add the stud blanks. Apply some pressure to assure proper adhesion. Set aside to fully cure.

Comments

Remixes

xTool Supplies Used in This Template

xTool F1
xTool F1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood

License

CC BY-NC-SA