Report
![[Laser cut and engrave] Wooden engraved earrings with unique design](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/6bce4466-f1e9-40f5-b66c-2ae874561426?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Climbing Rope Stud Earrings
Instructionrope
.xcs
Application scenario
Laser processing
Machine & module
xTool F1
2W, 10WCompatibles · 10
Material used
1/8"(3mm) Basswood Plywood
31
323
Information
Wooden engraved earrings with unique design for all the climbing enthusiasts
Instruction
1
Step1: Cut the design and paint it
Preview
Upload the file to XCS and cut it. For best results use masking tape if cutting on the F1 as it simplifies the painting process due to no burn marks. I recommend using acrylic painting pens as the tips are very thin and simplify painting smaller designs.
2
Step2: Apply the stud blank with glue
Preview
Apply a generous amount of superglue to the back of the previously cut earrings and add the stud blanks. Apply some pressure to assure proper adhesion. Set aside to fully cure.
Comments
