![[Laser cut and engrave] Xtool Silicone Watch Band jig (Process to create any jig)](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/903de266-98ab-4fef-806b-5e8bdc526647?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Xtool Silicone Watch Band jig (Process to create any jig)
Instruction
Information
If you are interested in learning how to make a jig - Follow the detailed steps or else just download the project and just cut it.
You can use any machine that can be used to cut 3mm wood.
Instruction
Step1: Preparing the Item
Take a clear picture of the item you want to create a jig for
Make sure you use a dark item with very light background. Using different tools or even “Edit” tool in xcs remove the background.
Step2: Outlining
The image shows the steps on what to do once you have the watch band image only.
1. You need to create outline
2. Release the compound vector and delete the unwanted pieces (You can also uncheck the “Add inner outline for bitmap” to skip this part)
3. Now you have a band - however this band will not be exact shape
4. Measure the band realtime in cm (Do it only width or height)
5. Once you have the distance in cm lets say height - convert that piece to that height. Since width and height maintains aspect - it will adjust the width.
6. Do this for for the bottom band as well
7. Pick any shape (We picked circle in this case) and unite it with both top and bottom piece - this makes it easy to swap the bands
You will now have to perform some test to see if your shape fits perfectly.
You can do the oultine and increase it a little. Perform test run
Step3: Glue
Once you find a perfect fit
Flip the wood - glue it to another full sheet
Step4
Now you have your custom band jig.
