HomeTemplatesToys & Games & ModelsPuzzles
aidenm
Report
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.

Wooden 7 Piece Tangram Puzzle With Tray

Instruction
tangram7parts.xcs
tangram7parts
.xcs
Application scenario
Laser processing (6min)
Machine & module
xTool D1 Pro
20W
Compatibles · 10
Material used
3mm Basswood Plywood
137
606
Information
      This wooden 5 piece puzzle not including the tray, is 80mm x 80mm, with the tray it is 100mmx100mm.
Instruction
1
Step1: Cut it out
Preview

Cut the file out. If you don't want to make a tray to go with it, delete the lower square and the outer square around the puzzle.

2
Step2: Put it together
Preview

If you didn't build the tray then your puzzle is complete. If you did then square A needs to be glued on top of square b, as marked in the file, with all the sides flush. Put the puzzle pieces in as shown in the picture. Your puzzle is now complete! 

Comments
Remixes
xTool Supplies Used in This Template
xTool D1 Pro
xTool D1 Pro
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY