Report
![[Laser cut and engrave] Wooden tangram puzzle in square frame](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/1d0f50d7-423f-46b0-ac47-f783ceaaaa7d?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden 5 piece Puzzle with tray
Instructionmod5piecepuzzle
.xcs
Application scenario
Laser processing (6min)
Machine & module
xTool D1 Pro
20WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
49
429
Information
This wooden 5 piece puzzle not including the tray, is 80mm x 80mm, with the tray it is 100mmx100mm. This puzzle can be solved as many other shapes as well besides as a square.
Instruction
1
Step1: Cut it out
Preview
Cut the file out. If you don't want to make a tray to go with it, delete the lower square and the outer square around the puzzle.
2
Step2: Put it together
Preview
If you didn't build the tray then your puzzle is complete. If you did then square A needs to be glued on top of square b, as marked in the file, with all the sides flush. Put the puzzle pieces in as shown in the picture. Your puzzle is now complete!
Comments
