Report
Wooden Keychains volleyball with name
InstructionKeyChainvolleyball
.xcs
Application scenario
Laser processing (5min)
Machine & module
xTool M1
10WCompatibles · 10
Material used
3mm Basswood Plywood
133
602
Information
Wooden Keychains volleyball with name. Made with 3mm bassewood plywood in Xtool M1
Instruction
1
Step1: Design
Preview
Open the KeyChainvolleyball.xcs file in Xtool Creative and you will have the Keychain
2
Step2: Cutting Setting
Preview
The file is set for 3mm Basswood Plywood with Triangular Prism.
The cut layer is red and is set for Xtool M1 10W, you can change this option depending on the machine. You can also modify the parameters depending on the material as plywood, acrylic or any other material you have available
3
Step3: Engraving settings
Preview
Add the name you want to have in the Keychain. The font can be modified, as well as the size. Always with the same power and speed settings so that the engraving is homogeneous.
4
Step4: Place Stainless Steel Keyring
Add the Stainless Steel Keyring to the wood to finish the Keychain
Comments
Remixes
xTool Supplies Used in This Template