Report
![[Laser cut and engrave] Maryland cutout wood coaster](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/28975139-528f-45ac-b882-389b8b19bb82?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Maryland cutout wood coaster
Instructioncorkround
.xcs
Show 1 more
Application scenario
Laser processing (7min)
Machine & module
xTool F1
2W, 10WMaterial used
glue
1/8"(3mm) Basswood Plywood
1/48"(0.53mm) Cork
19
301
Information
You can never have too many coasters. Show your Maryland pride and protect your table at the same time.
Instruction
1
Step1: Process coaster file in XCS
Import file into XCS. Frame the cut area on your machine to ensure correct positioning. Send the file for processing to your machine.
2
Step2: Process cork backing
Open the cork round file in XCS. Frame the cut area on your machine to ensure correct positioning. Send the file for processing to your machine.
3
Step3: (optional) Staining
If you choose to add stain to the coaster, do so now. Allow to dry.
4
Step4: Finishing up
Turn the coaster face down. Add glue to the back of the wooden coaster. Do not add glue to the cork, itself.
Once the back of the wooden coaster is glued, press the cork round onto the glued surface. Allow to dry.
You're done!
Comments
