Report
![[Laser cut and engrave] Thanksgiving Bamboo Utensil Set](https://image-res.xtool.com/resource/xtool%2Fcommunity%2Fmaking%2F68d14829-7f3c-4acb-a288-e71668c8e7a9%2F403407047_871918571293859_3826617548617937653_n-PhotoRoom%202.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Thanksgiving Bamboo Utensil Set
InstructionThanksgiving Utensil set
.xcs
Application scenario
Laser (30min)
Machine & module
xTool M1
10WCompatibles · 5
Material used
Bamboo
165
2687
Information
Engraving on Dollar Tree Bamboo Utensil Set
Instruction
1
Step1: Engraving on cup
Preview
Add all designs to XCS.
Remove the base plate and add the riser to M1.
Put Ra2 Pro.
Put cup to RA2 Pro.
Make sure the red dot is still in the highest place of cut.
Change to laser cylindrical.
Auto measure
and start processing
2
Step2: engraving on cooking and baking tools
Preview
Take off the Ra2 Pro.
Add the base plate.
And Put the cooking and baking tools.
Make sure the red dot is still on one of the tools.
Auto Measure
starts processing.
3
Step3: Finish with top coat
Preview
Finishing
I used the TotalBoat Wood Honey Food Safe Wood Finish to get the better color result.
Use a smooth cloth to apply the oil.
This oil is a really good result for cutting boards or any kitchen tools.
Thank you
Comments