Report
![[Laser cut and engrave] Reclaimed Cedar Key rack](https://image-res.xtool.com/resource/xtool%2Fcommunity%2Fmaking%2F585c2ef6-fb7f-4944-83a2-24c3be178742%2FWhatsApp%20Image%202023-11-21%20at%204.49.22%20PM(1).jpeg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Reclaimed Cedar Key rack](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Reclaimed Cedar Key rack
emblem
.xcs
Application scenario
Laser (20min)
Machine & module
xTool D1 Pro
20WCompatibles · 10
Material used
Corrugated Cardboard
Cutting Board
10
561
Information
I built this key rack from some old fence pickets after replacing my fence. I used the basic hooks from home depot I think they were about a dollar apiece. The laser engraving I did prior to gluing the front on. this made the alignment easier also used brush on polyurethane to seal it.
Comments
