Report
![[Laser cut and engrave] Xtool Grid](https://image-res.xtool.com/resource/xtool%2Fcommunity%2Fmaking%2Ff0cfeaae-31e7-482c-9dab-10609efbb745%2FIMG_5021.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Xtool Grid
InstructionGrid_File
.xcs
Application scenario
Laser (15min)
Machine & module
xTool D1 Pro
10WMaterial used
1/2" Plywood
Birch Plywood
1/2" Birch Plywood
405
3157
Information
A grid for lining up materials on your laser
Instruction
1
Step1: Material needs
I purchased a 24" x 24" piece of sanded birch plywood from my local hardware store and a set of Xtool laser retaining feet from an online marketplace. Next I installed the retainer legs onto the plywood and put my Xtool in the feet.
2
Step2: Setup
Pull up the file and enter the listed settings
3
Step3
Hit the Process button and click on center for the starting parameter. Run the file.
Comments