HomeTemplatesHome DecorMap
mdoyledesigns
Report
[Laser cut and engrave] Layered Epoxy Lake Map with Basswood and Reclaimed Wood:
Project made with xTool D1 Pro machine for Laser cut and engrave.
[Laser cut and engrave] Layered Epoxy Lake Map with Basswood and Reclaimed Wood:
[Laser cut and engrave] Layered Epoxy Lake Map with Basswood and Reclaimed Wood:

Layered Epoxy Lake Map with Basswood and Reclaimed Wood:

LakeHansonShare.xcs
LakeHansonShare
.xcs
Application scenario
Laser (4min)
Machine & module
xTool D1 Pro
40W
Compatibles · 11
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
pallet wood
178
4404

Information

      I used four sheets 3mm plywwood to make the main design.
Then I founds some old pieces of pallet wood in my garage and cut them for the frame.
Epoxy resin with blue powder tint.
Comments

Remixes

xTool Supplies Used in This Template

xTool D1 Pro
xTool D1 Pro
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
3mm Basswood Plywood