Report
Bookmark Music French horn with Name
InstructionBookmarkFrenchhorn
.xcs
Application scenario
Laser processing (8min)
Machine & module
xTool M1
10WCompatibles · 10
Material used
3mm Basswood Plywood
82
460
Information
Bookmark Music French horn with Name. Made with 3mm bassewood plywood in Xtool M1
Instruction
1
Step1: Design
Preview
Open the BookmarkFrenchhorn.xcs file in Xtool Creative and you will have the bookmark design.
2
Step2: Cutting Setting
Preview
The file is set for 3mm Basswood Plywood with Triangular Prism.
The cut layer is red and is set for Xtool M1 10W, you can change this option depending on the machine. You can also modify the parameters depending on the material as plywood, acrylic, leather, or any other material you have available
3
Step3: Engraving settings
Preview
Add the name you want to have in the Bookmark. The font can be modified, as well as the size. Always with the same power and speed settings so that the engraving is homogeneous.
Comments
Remixes
xTool Supplies Used in This Template