Report
![[Laser cut and engrave] Santa Ornament](https://image-res.xtool.com/resource/xtool%2Fcommunity%2Fmaking%2F60298c1d-3ee2-4168-a94d-e2ba10c4559c%2F20231121_202718%5B1%5D.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Santa Ornament
Instructionsanta 3 layerornament
.xcs
Show 1 more
Application scenario
Laser
Machine & module
xTool S1
20WMaterial used
Luan
baltic birch
Luan Plywood
Birch Plywood
76
684
Information
3 layer ornament with 1 layer recessed
Instruction
1
Step1: Cut out 1st and 2nd layer pieces
Once the ornament has been assembled with ca glue and dry put on a light coat of Polyurethane and sprinkle fairy dust for sparkle effect. Let dry and give it one more good coat with the Polyurethane.
2
Step2: Paint different layers, let dry for 3 hours.
Once the ornament has been assembled with ca glue and dry put on a light coat of Polyurethane and sprinkle fairy dust for sparkle effect. Let dry and give it one more good coat with the Polyurethane.
Comments