HomeTemplatesOffice & StationeryDesk Organization
thesynodics
Report
Laser cut and engrave Personalized wooden guitar bookmark with blue tassel and Henry name
Project made with xTool M1 machine for Laser cut and engrave.
Laser cut and engrave Personalized wooden guitar bookmark with blue tassel and Henry name
Laser cut and engrave Personalized wooden guitar bookmark with blue tassel and Henry name

Bookmark Music Guitar with Name

Instruction
BookmarkGuitar.xcs
BookmarkGuitar
.xcs
Application scenario
Laser processing (12min)
Machine & module
xTool M1
10W
Compatibles · 10
Material used
3mm Basswood Plywood
372
1280
Information
      Bookmark Music Guitar with Name. Made with 3mm bassewood plywood in Xtool M1
Instruction
1
Step1: Design
Preview

Open the BookmarkGuitar.xcs file in Xtool Creative and you will have the bookmark design.

2
Step2: Cutting Setting
Preview

The file is set for 3mm Basswood Plywood with Triangular Prism.

The cut layer is red and is set for Xtool M1 10W, you can change this option depending on the machine. You can also modify the parameters depending on the material as plywood, acrylic, leather, or any other material you have available

3
Step3: Engraving settings
Preview

Add the name you want to have in the Bookmark. The font can be modified, as well as the size. Always with the same power and speed settings so that the engraving is homogeneous.

Comments
Remixes
xTool Supplies Used in This Template
xTool M1
xTool M1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC-SA