Import the XCS file into the software and confirm the dimensions, processing positions, and processing modes. Note: For this case, the file uses 3mm transparent acrylic, 5mm white acrylic, and blank self-adhesive stickers. If the type and thickness of the materials you choose are different, please adjust the laser processing parameters and the file dimensions according to the actual materials. 

Put the 3mm transparent acrylic and 5mm white acrylic into the P2 processing area respectively and make sure the materials are flat. Then select honeycomb plate processing and sequentially cut and process the acrylics of different colors and thicknesses with lines of different parameters. Perform layout processing according to the actual situation of the materials. Note: The processing parameters marked here are the officially recommended parameters for 3mm transparent acrylic and 5mm white acrylic. If you prefer different effects, please adjust them manually.
 

Put the blank self-adhesive stickers into the M1 Ultra processing area and make sure the materials are flat. Then select the combined processing mode and sequentially process the self-adhesive stickers with the inkjet head and the fine cutting knife. Perform layout processing according to the actual situation of the materials. Note: The processing parameters marked here are the officially recommended parameters for blank self-adhesive stickers. If you prefer different effects, please adjust them manually.

Stick the self-adhesive stickers on both the front and back sides of the 5mm white acrylic. Use colored screws to fasten it together with the two layers of 3mm transparent acrylic. Finally, attach a keychain.