Report
![[Laser cut and engrave] Personalized heart-shaped wooden keychains with initials and date](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/b536768f-4675-4e01-92ca-abc14b2be9ef?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Valentine's Day Couple Keychain Wood with two heart design
InstructionKeyChain10
.xcs
Application scenario
Laser processing (5min)
Machine & module
xTool M1
10WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
140
655
Information
Valentine's Day Couple Keychain Wood with two heart design. Made with 3mm bassewood plywood in Xtool M1
Instruction
1
Step1: Design
Preview
Open the KeyChain10.xcs file in Xtool Creative and you will have the Keychain
2
Step2: Cutting Setting
Preview
The file is set for 3mm Basswood Plywood with Triangular Prism.
The cut layer is red and is set for Xtool M1 10W, you can change this option depending on the machine. You can also modify the parameters depending on the material as plywood, acrylic, leather, or any other material you have available
3
Step3: Engraving settings
Preview
Add the name and date you want to have in the Keychain. The font can be modified, as well as the size. Always with the same power and speed settings so that the engraving is homogeneous.
4
Step4: Place Stainless Steel Keyring
Add the 2 Stainless Steel Keyring to the two wood to finish the Keychain
Comments
