Report
![[Laser cut and engrave] Wooden plaque with eagle engraving and Isaiah 40:31 Bible verse](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/0c3c2467-8d54-4e8c-b53e-59abf5c44cb2?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Isaiah 40:31 Plaque- Bald Eagle on Gummy Cherry Hardwood
InstructionCherryEagle
.xcs
Show 2 more
Application scenario
Laser processing
Machine & module
xTool S1
20WMaterial used
Gummy Cherry Hardwood
71
617
Instruction
1
Step1
Easy to run project. This was ran with a 20w laser. This Gummy Cherry Hardwood Board was under 5 dollars. Finished with a few thin coat of Boiled Linseed Oil
2
Step2
Place material onto the honeycomb
3
Step3
Auto measure the distance for you material
4
Step4
Mark your working area with the rectangle option
5
Step5
Load the file or SVG and Verify the correct settings for your machine
6
Step6
Run the project, this one takes a while so be patient- running 2 passes gets a great result.
7
Step7
Remove the finished project from the machine and finish off with some boiled linseed oil.
Comments
Remixes
xTool Supplies Used in This Template
Related collections
License
This work contains AI-generated content.