Report
Keychain Wood with Dog Paw-shaped with name Design
InstructionKeyChain7
.xcs
Application scenario
Laser processing (10min)
Machine & module
xTool M1
10WCompatibles · 10
Material used
3mm Basswood Plywood
281
929
Information
Keychain Wood with Dog Paw-shaped with name Design. Made with 3mm bassewood plywood in Xtool M1
Instruction
1
Step1: Design
Preview
Open the KeyChain7.xcs file in Xtool Creative and you will have the Keychain
2
Step2: Engraving settings
Preview
Preview
Preview
Add the name you want to have in the Keychain. The font can be modified, as well as the size.
The name is placed over the dog paw and the 'subtract at overlap' option is used so that the name is not engraved.
Always with the same power and speed settings so that the engraving is homogeneous.
3
Step3: Cutting Setting
Preview
The file is set for 3mm Basswood Plywood with Triangular Prism.
The cut layer is red and is set for Xtool M1 10W, you can change this option depending on the machine. You can also modify the parameters depending on the material as plywood, acrylic, leather, or any other material you have available
4
Step4: Place Stainless Steel Keyring
Add the Stainless Steel Keyring to the wood to finish the Keychain
Comments
Remixes
xTool Supplies Used in This Template