HomeTemplatesFashion & WearablesAccessories
thesynodics
Report
Laser cut and engrave Personalized wooden heart keychains with 'Your Name' engraving
Project made with xTool M1 machine for Valentine's Day.
Laser cut and engrave Personalized wooden heart keychains with 'Your Name' engraving
Laser cut and engrave Personalized wooden heart keychains with 'Your Name' engraving

Valentine's Day Couple Keychain Wood with heart design

Instruction
KeyChain3.xcs
KeyChain3
.xcs
Application scenario
Laser processing (5min)
Machine & module
xTool M1
10W
Material used
3mm Basswood Plywood
Stainless Steel Keyring
490
2172
Information
      Valentine's Day Couple Keychain Wood with heart design. Made with 3mm bassewood plywood in Xtool M1
Instruction
1
Step1: Design
Preview

Open the KeyChain3.xcs file in Xtool Creative and you will have the Keychain

 

2
Step2: Cutting Setting
Preview

The file is set for 3mm Basswood Plywood with Triangular Prism.

The cut layer is red and is set for Xtool M1 10W, you can change this option depending on the machine. You can also modify the parameters depending on the material as plywood, acrylic, leather, or any other material you have available

3
Step3: Engraving settings
Preview

Add the name you want to have in the Keychain. The font can be modified, as well as the size. Always with the same power and speed settings so that the engraving is homogeneous.

4
Step4: Place Stainless Steel Keyring

Add the 2 Stainless Steel Keyring to the two wood to finish the Keychain

Comments
Remixes
xTool Supplies Used in This Template
xTool M1
xTool M1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC-SA