Report
![[Laser cut and engrave] Filz Platzdecke](https://image-res.xtool.com/ali-res/community/making/cefa7d3b-0227-4d81-9c31-4588bc48dd77/tempImageu0hceQ.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Filz Platzdecke](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Filz Platzdecke
InstructionPlacemats
.xcs
Application scenario
Laser (40min)
Machine & module
xTool M1
Compatibles · 1
Material used
1/256"(0.1mm) White StickerPaper
382
8562
Information
Instruction
1
Step1
Cut your felt yardage with scissors if necessary to fit your machine. The finished size is 350 x 284.5 mm (13.78 x 11.2").
2
Step2
Measure the thickness of your felt with a caliper.
3
Step3
Take a scrap piece and make test cuts for the best setting. In my experience: each felt color requires slightly different settings for best results.
4
Step4
Place the felt on the prisms or a honeycomb.
5
Step5
Cut the felt with your settings. For me, this took about 35 minutes. (Please always supervise the cutting to be able to react immediately in case of a flare-up).
6
Step6
To be able to remove the cut out parts well I use a weeding hook.
Comments
