HomeTemplatesFashion & WearablesJewelry
hellowildink
Report
[Laser cut and engrave,Screen printing,Foil transfer,Inkjet printing,Pen drawing] Engraved turtle necklace pendant with minimalist design
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Project made with xTool M1 Ultra machine for Laser cut and engrave.
[Laser cut and engrave,Screen printing,Foil transfer,Inkjet printing,Pen drawing] Engraved turtle necklace pendant with minimalist design
[Laser cut and engrave,Screen printing,Foil transfer,Inkjet printing,Pen drawing] Engraved turtle necklace pendant with minimalist design
[Laser cut and engrave,Screen printing,Foil transfer,Inkjet printing,Pen drawing] Engraved turtle necklace pendant with minimalist design
[Laser cut and engrave,Screen printing,Foil transfer,Inkjet printing,Pen drawing] Engraved turtle necklace pendant with minimalist design
[Laser cut and engrave,Screen printing,Foil transfer,Inkjet printing,Pen drawing] Engraved turtle necklace pendant with minimalist design

Sea Turtle Line Art Design

Instruction
SeaTurtles_01.xcs
SeaTurtles_01
.xcs
Application scenario
Laser processing、Screen printing、Foil transfer、Inkjet printing、Pen drawing (5min)
Machine & module
xTool M1 Ultra
20W
Compatibles · 3
Material used
1.7mm Silver Stainless Steel Tag
184
956

Information

      Sea Turtle Line Art Design

If you enjoy line art designs, be sure to visit my Etsy store: https://wildinkdigital.etsy.com

The settings are optimized for engraving on stainless steel using the Xtool M1 Ultra, but the design can be used for any project, including laser engraving and more!

This design includes the following formats:

.PNG
.SVG
.PDF
.XCS
Check out the video tutorial and follow the instructions to achieve the best results!

Thank you, and happy creating!

Instruction

1

Step1

Steps for Engraving on Stainless Steel with the M1 Ultra

Select Your Material
Take your stainless steel material and spray it with the xTool black laser marking spray.

Prepare the Surface
Wait for 15–30 minutes for the spray to dry, or use a heat gun to speed up the process.

Secure the Material
I use the cutting mat to keep my pendant in place, but be very careful not to engrave onto the mat.

Mark the Process Area
Use the "mark process area" feature to carefully identify and mark the exact spot where your pendant is located.

Focus or Auto Measure
Ensure the focus is correct or use the Auto Measure feature for accurate engraving.

Settings

Power 90
Speed 30
Pass 1
Lines per cm 160 or 220   


Engraving Time
Depending on the size of the design, the engraving process typically takes about 5 to 15 minutes.
Comments

Remixes

xTool Supplies Used in This Template

xTool M1 Ultra
xTool M1 Ultra
1.7mm Silver Stainless Steel Tag
1.7mm Silver Stainless Steel Tag

License

CC BY