Report
![[Laser cut and engrave] Little White Church Ornament](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/fc484955-3d14-4dbf-8791-72c7ba072cd6?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Little White Church Ornament
InstructionLittleWhiteChurch
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
40WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
1/4"(6mm) Basswood Plywood
37
265
Information
layer church ornament
Instruction
1
Step1: Measure and cut base pieces
Using 6mm board measure cutting area. Cut large and small base pieces of the church. Paint white and set aside.
2
Step2: Cut roof and wreath pieces
Using 3mm board cut the roof and wreath pieces. Stain or paint roof pieces and wreath.
3
Step3: Assemble
Layering the base pieces, smaller in the front, glue with wood glue. Add the roof pieces and door. Glue on wreath after roof glue has set to in sure they don’t move.
4
Step4: optional
Add snow and glitter for a festive winter touch.
Comments
