Report
![[Laser cut and engrave] Wooden raclette stand with engraved decorations](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/05172052-cbaa-4d0b-8c0a-367a49c0bad9?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden raclette stand with engraved decorations
InstructionCut-TischRaclette
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
40WCompatibles · 11
Material used
1/4"(6mm) Basswood Plywood
31
574
Information
Easy and strong raclette table- 8mm plywood/ 6mm is possible- for more space on table
Instruction
1
Step1
used with 8mm Basswood Plywood - For 6mm change the side-connection (5min. changeing time)
Cut the top of the table and Encrave it.
2
Step2
Change the engraver to the Linegraving Setpoits must be changed . Refer to info in File - working area 2
3
Step3
Cut and engrave the downside from table.
4
Step4
Change the engraver to the Linegraving Setpoits must be changed . Refer to info in File - working area 2
Comments
