Extract and outline the text

I'll take the picture below as an example. You can also use the font from XCS. If you use the fonts that come with the XCS software，you do not need the following steps.

Import and edit the bitmap image and erase the background.

Click Outline to set offset distance as 0, and select Add inner outline for bitmap.

After that, delete the original bitmap image and click Reflect to flip it.

Add a new canvas and add the images you want

Select the Blade Cut mode and the PU heat Transfer vinyl from the material list. The xTool selected reference works fine for me.

Place the material on the cutting mat upside down, adjust the position with the camera. And then click Process to get started.

Trim the excess parts and keep the pattern. Do not tear off the clear adhesive film.

Put the canvas bag flat, then put your design on it. Make sure you put it in the best position.

Preheat the heat press, then press on the material about 3-5s each time (different times for different materials). Please use it carefully during this process to prevent burns.

Tear the film off the surface. If there is a part that cannot be torn off, please use the heat press on that part again.

Here we go! We made it!

ease note that the temperature of the processed area is still very high at this point. Therefore, please take care to avoid getting burned. And don't forget to turn off the heat press.