Report
![[Laser cut and engrave] Geometric wooden keychain with tree design](https://storage-us.atomm.com/resource/xart/result/218859/bbb879dc-2ba9-488f-91c5-3e872d09eae0.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Tree of Life - Quilt Themed Keychain
InstructionTreeofLife
.xcs
Application scenario
Laser processing (6min)
Machine & module
xTool S1
20WCompatibles · 11
Accessories
xTool S1 Honeycomb Panel
Material used
1/8"(3mm) Basswood Plywood
22
521
Information
After making the 4 pack of quilt-themed keychains, the customer requested this design. The Tree of Life is the newest design in the series of previously uploaded quilt-themed keychains.
Instruction
1
Step1
Load a sheet of 12x12 3mm Basswood onto the honeycomb insert.
2
Step2
Load the file and make any adjustments needed. If you are making these in bulk you can copy and paste the design to fill the sheet if you plan on selling these.
3
Step3
Focus the laser with the auto measure tool. Then marking your working area with the rectangle option.
4
Step4
Run the file, these settings produced great results for me. Adjust as needed for your liking.
5
Step5
Once complete, remove each keychain and attach the jump ring to the hole that was cut and to the keychain and ring.
6
Step6
Use a small pair of pliers to close the ring and attach the wooden quilt design to the keychain.
7
Step7
Optional- Before adding the jump ring and keychain you can coat each piece with a thin coating of clear poly spray.
Comments
