HomeTemplatesOffice & StationeryStationery Supplies
thesynodics
Report
Laser cut and engrave
Project made with xTool M1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave

Bookmark Surfboard with Turtle design

Instruction
SurfboardTurtle.xcs
SurfboardTurtle
.xcs
Application scenario
Laser processing (10min)
Machine & module
xTool M1
10W
Compatibles · 10
Material used
3mm Basswood Plywood
100
409
Information
      Wooden surfboard bookmark with Turtle design. Made with 3mm bassewood plywood in Xtool M1
Instruction
1
Step1: Design
Preview

Open the surfboard file in Xtool Creative and you will have the bookmark design.

 

2
Step2: Cutting Setting

The file is set for 3mm Basswood Plywood with Triangular Prism.

The cut layer is red and is set for Xtool M1 10W, you can change this option depending on the machine. You can also modify the parameters depending on the material as plywood, acrylic, leather, or any other material you have available

3
Step3: Engraving settings

You can use the file speed of 120mm/s or set it slower for a deeper engrave.

You can experiment with different settings to achieve your desired finish.

Comments
Remixes
xTool Supplies Used in This Template
xTool M1
xTool M1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC-SA